Anker Solix Smart meter Gen.2 3-phase for Solarbank 4 & MAX AC

The Anker The SOLIX Smart Meter Gen 2 (three-phase) AE1X0311 records voltage, current and power in the home network in real time and transmits measured values ​​to compatible devices. Anker-SOLIX memory. The Three-phase smart meter for Solarbank 4 Pro and Solarbank Max AC It supports separate load measurement. With a width of 19 mm, DIN rail mounting, WLAN, Bluetooth and RS485, it enables space-saving energy management; installation should be carried out by a qualified electrician.

Mini Power / New Power GmbH has been operating as a [company name] since 2025. Anker SOLIX Authorized Retailer certified. Proof is in the official Anker SOLIX Dealer Overview visible.

Delivery

1 × Anker SOLIX Smart Meter Gen 2 (three-phase, AE1X0311)
1× 63A Three-CT Cable Assembly
1× Antenna extension
1 document

Produktvorteile

-- Real-time measurements: The smart meter records voltage, current and power, enabling compatible solar banks to adjust their power output within approximately three seconds.

-- Space-saving installation: The 19 mm narrow housing requires only one division unit on a 35 mm DIN rail.

-- Flexible communication: WLAN, Bluetooth and RS485 support the connection to Anker-App and confirmed system components.

-- Three-phase data collection: The included 63A three-CT cable assembly records the three phases of the house connection; a second suitable CT assembly is required for additional, separate PV or storage monitoring.

Compatibility

The manufacturer's manual mentions the Anker SOLIX Solar Bank 4 E5000 Pro (AE103) and the Anker SOLIX Solarbank Max AC (A17E2) as a compatible main unit. The smart meter is designed for mounting on a 35 mm DIN rail in a dry indoor environment and has an IP20 protection rating. Connection, protection, and commissioning in the distribution box must be carried out according to the [relevant standard/regulation]. Anker-In accordance with the manual and local regulations, the work should be carried out by a qualified electrician.

Technical information

Model: AE1X0311, three-phase

Nominal voltage: 3~ 230/400 V AC, 50/60 Hz

Maximum input current: 120 A per channel; included CT module: 63 A

Dimensions: 105 × 19 × 66,7 mm

Power Consumption: under 2 W

Communication: Bluetooth, 2,4 GHz Wi-Fi and RS485

Protection and environment: IP20, indoor use, -25 °C to 55 °C

Matching accessories and related products

• Anker SOLIX Solarbank 4 E5000 Pro Storage
• Anker SOLIX Solarbank MAX AC Plug&Play Home Storage
• Anker SOLIX AC-Wieland cable 5 m for Solarbank 4 Pro / Max AC

Why Mini Power

At Mini Power you will receive the Anker SOLIX Smart Meter Gen 2 (three-phase) With clearly identified models, verified scope of delivery, and verifiable compatibility information. The linked solar bank systems and matching connection accessories simplify assembly without model confusion. Our service team is available to assist you before purchase with any questions regarding the selection of smart meter generations or the required CT equipment. Electrical planning, installation, and commissioning in the distribution box remain the responsibility of a qualified electrician.

Frequently asked questions

-- What components are included in the delivery?

Included are a three-phase Smart Meter Gen 2 AE1X0311, a 63A three-CT cable assembly, an antenna extension and a document.

Is the Smart Meter Gen 2 compatible with older solar bank models?

The current manufacturer's manual confirms the Solarbank 4 E5000 Pro and the Solarbank Max AC as compatible main units. Compatibility with other models is not guaranteed on this product page.

Can I install the smart meter myself?

The installation takes place in the distribution box. Anker It is recommended that a qualified electrician be consulted; in addition, the manufacturer's manual and local electrical engineering regulations must be observed.