Anker SOLIX solar bank 4 E5000 Pro 5 kWh + power dock

The Anker SOLIX solar bank 4 E5000 Pro Set with Power Dock It combines 5.024 Wh of storage with centralized coupling of multiple solar banks. Each solar bank offers four MPPTs, up to 5.000 W of PV input, and 2.500 W of AC power with a suitable installation. The Power Dock connects up to four devices and, with the latest firmware, enables a system output of up to 9,6 kW.

Mini Power / New Power GmbH has been operating as a [company name] since 2025. Anker SOLIX Authorized Retailer certified. Proof is in the official Anker SOLIX Dealer Overview visible.

Delivery

1 × Anker SOLIX Solarbank 4 E5000 Pro
1 × Anker SOLIX Power Dock
1 × Retrofit kit for Anker SOLIX Power Dock
1× AC connection cable, 3 m
1× Connection and mounting material as per manufacturer's package
1× Operating and safety instructions
No Smart Meter Gen.2 and no extension battery included

Produktvorteile

-- 5.024 Wh per solar bank: The basic capacity can be expanded to 30 kWh per solar bank with up to five BP5000 units.

-- Four MPPTs and 5.000 W PV input: Applies to each solar bank 4 E5000 Pro and supports flexible module design.

-- Up to 2.500 W per solar bank: Mains-connected power with a suitable, approved electrical installation; Schuko operation remains limited to 800 W.

-- Up to four devices can be connected to the Power Dock: Connects multiple compatible solar banks into a centrally coordinated system.

-- Up to 9,6 kW AC system output: With four Solarbank 4 E5000 Pro units, current firmware and suitable system configuration.

Compatibility

The Solarbank 4 E5000 Pro is equipped with Anker SOLIX BP5000 expansion batteries are compatible, as are, according to the manufacturer, the BP1600 and BP2700 batteries; when using mixed batteries, the stacking order can affect charging performance. Current firmware and an approved configuration are required for operation with the Power Dock. Older Power Dock models may require a separate COM connector or accessory kit; newer models support direct AC connection. Smart Meter Gen.2 is not included in this set.

Technical information

Solarbank 4 E5000 Pro – Values ​​per device

-- Nominal energy: 5.024 Wh
Expandable: up to 30 kWh with 5 × BP5000
-- PV input: up to 5.000 W via 4 MPPTs
-- MPPT voltage range: 16–50 V DC
-- Rated power: 2.500 W
-- Mains-connected Schuko operation: up to 800 W
-- Off-grid output: up to 2.500 W
-- AC bypass output: up to 3.600 W
UPS switching time: less than 10 ms
-- Protection class: IP66
-- Operating temperature: −20 °C to 55 °C
-- Battery technology: LiFePO4
-- Manufacturer's specification: up to 10.000 charging cycles

Power Dock – Values ​​of the paired system

-- Number of connectable solar bank devices: up to 4
-- Maximum AC system output with 4 × E5000 Pro: up to 9,6 kW
-- Prerequisites: current firmware, approved configuration and professional installation
-- Smart Meter Gen.2: not included in the set
-- COM Connector / Accessory Kit: required depending on power dock version

System planning and performance limits

The specifications for Solarbank and Power Dock describe different levels of performance. 5.024 Wh, 5.000 W PV input, and 2.500 W AC output apply to each Solarbank 4 E5000 Pro unit. The specification of up to 9,6 kW, on the other hand, describes the maximum AC output of a Power Dock system with four E5000 Pro units. Schuko Plug&Play remains limited to 800 W per unit. Higher power outputs require a suitable electrical circuit, manufacturer approval, updated firmware, and installation by a qualified electrician.

Matching accessories and related products

-- Anker SOLIX BP5000 storage unit for solar bank 2/3/4: 5 kWh expansion battery for increased capacity.

-- Anker Solix Smart meter Gen.2 3-phase for Solarbank 4 & MAX AC: suitable consumption measurement and system control.

-- Anker SOLIX COM Connector Kit – Communication set for Solarbank 4 Pro: may be required for older Power Dock models.

Why Mini Power

Mini Power separates at Solar bench 4 set with power dock Mini Power consistently differentiates between values ​​for each solar bank and the values ​​of the entire coupled system. This allows you to see before purchasing what each of the following performance values ​​represents: 5.024 Wh, 5.000 W PV input, 2.500 W AC, and 9,6 kW system output. Included and additionally required components are also clearly identified. Mini Power provides support with system design; connection, protection concept, and commissioning are handled by a qualified electrician.

Frequently asked questions

-- Is 9,6 kW the output of a single solar bank?

No. Up to 9,6 kW applies to a Power Dock system with four Solarbank 4 E5000 Pro units, current firmware and proper installation.

-- Is a Gen. 2 smart meter included?

No. Smart Meter Gen.2, expansion batteries and any required connector kits are sold separately.

Does every power dock version require a connector kit?

No. Older models may require an interface upgrade; newer power docks support direct AC connection. Firmware and model should be checked before installation.